Kakimori – the Nibs

Update and Tips #1 (08/08/22): I was able to hang out at the River City Pen Company’s table during the 2022 DC Pen Show. I enjoyed my time sharing what I knew about using dip nibs and Rich’s nib holders. One show attendee mentioned that she disliked the Kakimori nib she had. She could not write with it. I gave her a few suggestions to try her nib again. One was to use a different fountain pen ink brand and color or use her favorite ink. Another was to lighten her grip on the nib holder. The other suggestion and probably the most important one is to write in the same position and angle as if you had a fountain pen in your hand.

Update #2 (08/08/22): I forgot to mention that I hosted an “after hours” pen & ink workshop for the exhibitors. Just for fun, I handed out my Kakimori nibs with my resin nib holders to try out. One had the brass nib and the other had the steel nib. I gave no instructions on how to use. They immediately took to this nib and nib holder immediately and spent some time writing with it. A few minutes later, they quickly exchanged nib and nib holder to see how the other nib felt in their hand. This was a great experiment for me to observe and I received positive feedback on both. It was interesting to see one attendee preferred the steel nib with the finer writing feel and the other attendee preferred the brass nib and the wetter lines that it could create.

(Original post begins here)

I found another nib that works great with my inky swatchings. They are round nibs and appears to have eight sides with long cut outs along the sides.

The cutouts allow for ink to settle into the nib when dipped into a bottle of ink. This allows for longer writing sessions before having to the dip the nib back into ink. You know what? It really does work.

I saw there were two offerings available. One in stainless steel and one in brass. I went with the stainless steel version as I know I would not have to worry about rust or much discoloration after use.

I took a picture for those who are curious as to what the backside of the nib looks like. The nib is hollow until the start of the cutouts. This allows the nib to sit into the nib holder.

The stainless still nib feels a bit stiff when I write with the nib. In my normal writing angle of around 45 degrees I can get a nice line width. I can also feel some feedback while writing. When I hold the nib slightly below my normal writing angle, I can get a broad stroke of color on my paper.

I enjoyed my stainless steel nib so much, that I went ahead and ordered a brass nib. I read about the differences between these two nibs. The brass nib tends to be softer and can produce broader lines. It’s also good for artists to use in their sketches.

I can definitely feel a difference between the two nibs. The brass feels a bit softer and produces a smoother experience while writing. I can also get broader strokes of color across my paper.

Do I prefer one over the other? It depends. When I’m creating my writing samples, I automatically reach for my stainless steel nib. I need a bit more time to work with both nibs.

While cleaning the nib, I did encounter some stubborn inks that wanted to cling to the nib’s cutouts. I have a child’s extra soft toothbrush that I dip in water and give a gentle scrub.

I can’t wait to use up all my inky sample vials using these lovely nibs.

Note: I enjoy this combination of nib and nib holder. I mentioned in my previous review of the River City Pen Company nib holders that for fountain pen users, there is a “familiar feel” while holding this nib holder. Once you have this combination in your hand, you just need to focus on getting used to this unusual & lovely Kakimori nib.

Nibs: Kakimori Stainless Steel and Brass nibs available at Yoseka Stationery

Nib holders: River City Pen Company – Pink, Green, & White DiamondCast (McKenzie Penworks) and Barrier Reef (Turnt Pen Company)

Inks: Diamine Party Time and Storm (Red Inkvent)

Paper: Rhodia Dot Pad

Another Favorite Nib Holder

While I’m at it, I thought I would add another nib holder I have from River City Pen Company. This one is called Pink, Green, and White DiamondCast. This is a gorgeous resin with light pastel colors and subtle sparkles. I have a few DiamondCast resin fountain pens that sparkles in any kind of light. It can sometimes be a lovely bit of distraction while writing.

I’m thankful my nib holder has just enough sparkles and does not overpower the pink, green, and white colors in this resin.

My plan is use my stainless steel Kakimori nib in this DiamondCast holder. My brass Kakimori will go in my Barrier Reef nib holder. A review is in the works for these two nibs showing the different writing experiences, what I am using them for, and how well they write.

The nib holder fits well in my hands. The holder looks a bit long in my hand and that is the result of the angle I had to take the picture with my left hand.

I’m happy to say my nib holders (with Kakimori nibs) have replaced my glass dip pens. I disliked the sharp and scratchy glass tips and a bit annoyed how fragile they were.

Now, I’m off to create some inky swatches and try out some new inks.

Nib Holder: Pink, Green, & White DiamondCast by River City Pen Company

Nib: Kakimori Stainless Steel nib